10 Series Gen II LoPro on a Ford F-550Best Seller
Gen II LoPro

10 Series

Built strong, designed smart. The 10 Series is the truck you see behind Ram 5500s and Ford F-550s all over the country, with a load angle as low as 9° and a 19'6", 20' or 21' deck. An optional 100" width gives you more room.

10,000 lbDeck rating
3,500 lbWheel lift rating
19'6" / 20' / 21'Deck length
As low as 9°Load angle
96"Bed width (100" or 102" opt.)
9KPlanetary winch

Standard

  • 16' quad rail subframe
  • Dual 4" I-beams with wide flange
  • 3/16" deck sheet
  • 2" × 2" × 11-gauge square tube crossmembers
  • 10" crossmember spacing
  • Solid removable rails
  • Front & rear inserts
  • (11) T-slots
  • T-slot baskets on bed
  • 1,152 sq. in. of bed slide wear pads
  • Dual flange bed lock
  • (2) Sascoloy hinge pins
  • High-gloss black paint finish
  • 3,500 lb. wheel lift
  • Crossbar with hitch receiver
  • Driver & passenger side L-arms
  • Driver & passenger side slide grids
  • Bed-mounted pylon with (2) safety chain tie-down points
  • Subframe chain buckets with (2) 10' safety chains
  • 4-prong tow plug
  • 9K planetary winch
  • 3/8" × 75' winch cable with self-locking hook
  • Remote clutch release for winch
  • Control panel with dual handles and night light
  • Hydraulic tank & filter
  • LED stop/tail/turn
  • (8) LED bed marker lights: (2) 3/4" and (6) 2"
  • (2) upper LED work lights
  • (2) lower LED work lights
  • (2) 3/4" LED marker lights in subframe
  • DOT lights in subframe
  • Back-up alarm
  • Fire extinguisher
  • (2) Dual-Tech mud flaps

Options

  • Custom bed color
  • Diamond deck sheet
  • Non-skid bed center
  • Non-skid stripes
  • 100" wide bed with solid removable rails
  • 102" wide bed with formed rails
  • 8" crossmember spacing
  • 2" × 2" × 3/16" square tube crossmembers
  • Extra T-slots with baskets
  • Center bed T-slots with baskets
  • Stationary pylon
  • Quarter fenders
  • Full fenders
  • 36" toolboxes / baskets
  • 48" toolboxes / baskets
  • 60" toolboxes / baskets
  • 86" toolboxes / baskets
  • Custom toolbox configuration
  • Toolbox top tray
  • Fender boxes / baskets
  • 4,000 lb. wheel lift
  • Self-loader wheel lift & crossbar
  • Wheel lift lasso straps & ratchets
  • 8' safety chains
  • 10' safety chains
  • V-bridle
  • Custom chain combination
  • 8-point tie-down set
  • Trailer hitch & pin
  • PTO / pump combo
  • Clutch pump
  • Air compressor
  • Air hose reel
  • Air winch clutch release
  • 2-function up to 12-function remote, electric or air
  • Lightbar
  • Strobe package: (2) in tail panel, (4) in grille
  • Extra LED marker lights for bed
  • All 3/4" LED bed marker lights
  • Magnetic tow lights
  • Back-up camera
  • Custom lighting
  • Safety kit
  • Custom accessories
  • Alcoa covers / simulators
  • Stainless package
  • Switch panel
  • Jumpstart kit
  • Installation

All toolboxes come standard with interior lights.

Quote a 10 Series →▶ Watch It Work
12 Series Gen II LoPro on a white FreightlinerMedium Duty
Gen II LoPro

12 Series

The do-everything deck for a busy operation. The 12 Series steps up to a full 102" bed, formed side rails, a 4,000 lb. wheel lift and a 12K planetary winch, in lengths up to 23 feet, with a load angle as low as 9°.

12,000 lbDeck rating
21' / 22' / 23'Deck length
102"Bed width
4,000 lbWheel lift
8"Crossmember
12KPlanetary winch
As low as 9°Load angle

Standard

  • 3/16" deck sheet
  • Chain T-slots
  • Formed side rails
  • Subframe chain buckets with 10' chains
  • Open steel pylon
  • Tow plug
  • Safety kit
  • 3/8" × 75' cable, self-locking hook
  • Hydraulic pump
  • As low as 9° load angle
  • LED stop/tail/turn markers
  • Upper & lower work lights
  • Hydraulic oil tank & filter
  • Quad rail sub-frame
  • 1,152 sq. in. slide pads
  • 12K planetary winch
  • 8" cross member spacing
  • Dual flange bed locks
  • Hydraulic wheel lift with receiver
  • Winch handle release extension
  • (2) wheel lift straps and ratchets
  • (2) 10' safety chains
  • V-bridle
  • 8-point tie-down set
  • Front & rear inserts
  • Back-up alarm
  • High-gloss black finish
  • 4" wide flange I-beams
  • Sascoloy hinge pins

Options

  • Custom bed color
  • Sand grit options
  • Additional T-slots
  • 6" crossmember
  • Stationary pylon
  • Basket w/ SS cover
  • Toolbox & accessory options
  • Air release winch
  • Additional marker lights
Quote a 12 Series →▶ Watch It Work
16 Series rollback on a black PeterbiltTop of the Line
LoPro Carrier

16 Series

The biggest deck we build, rated for 16,000 lb. It's made for operators who haul heavy every day and won't give up the low-profile load angle to do it. Decks run 22', 23' and 24' on a full 102" bed, with a 4,000 lb. wheel lift and a 12K planetary winch.

16,000 lbDeck rating
22' / 23' / 24'Deck length
102"Bed width
4,000 lbWheel lift
As low as 9°Load angle
8" (6" opt.)Crossmember
12KPlanetary winch

Standard

  • 3/16" deck sheet
  • Chain T-slots
  • Formed side rails
  • Subframe chain buckets with 10' chains
  • Open steel pylon
  • Tow plug
  • Safety kit
  • 3/8" × 75' cable, self-locking hook
  • Hydraulic pump
  • As low as 9° load angle
  • LED stop/tail/turn markers
  • Upper & lower work lights
  • Hydraulic oil tank & filter
  • Quad rail sub-frame
  • 1,152 sq. in. slide pads
  • 12K planetary winch
  • 8" cross member spacing (6" optional)
  • Dual flange bed locks
  • Hydraulic wheel lift with receiver
  • Winch handle release extension
  • (2) wheel lift straps and ratchets
  • (2) 10' safety chains
  • V-bridle
  • 8-point tie-down set
  • Front & rear inserts
  • Back-up alarm
  • High-gloss black finish
  • 6" wide flange I-beams
  • Sascoloy hinge pins
Request 16 Series Specs →▶ Watch It Work
Dual-Tech self-loader wrecker towing a pickupSelf-Loader
Self-Loader Wrecker

SL-40

Hook up without leaving the cab. The SL-40 puts the Dual-Tech self-loader head on a light-duty chassis, which makes it ideal for repo, city calls and tight lots. It runs entirely by remote. One even got a one-of-a-kind paint job from Count's Kustoms.

7,500 lbTowing capacity
4,000 lbLift rating
72"Reach, power tilt
±22°Pos. / neg. tilt
92"Wide body
60"Cab to axle

Standard

  • Dual-Tech self-loader head
  • Self-leveling wheel lift
  • 3/16" aluminum body
  • 2 side toolboxes
  • LED lighting package & work lights
  • Remote-only controls
  • Safety chains & mud flaps

Options

  • Drag winch
  • Tunnel box (24" US / 20" import chassis)
  • Diamond deck dress kit
  • Color-matched paint
  • Collins dollies
  • Installation
Quote an SL-40 →▶ Watch It Work
Dual-Tech DSP 9/9 sidepuller on its standRecovery
Rollback-Mounted Sidepuller

DSP 9/9 & 12/12

Built to handle, built to last. The Dual-Tech sidepuller mounts behind the cab and turns your rollback into a recovery truck, so you can handle ditch pulls and side recoveries that a flatbed alone can't reach. Hand-built in Bean Station.

9,000 lbDSP 9/9 winches
12,000 lbDSP 12/12 winches
DualWinches, wireless remote

Standard

  • Dual winches
  • Wireless full-function remote
  • Air free spool
  • 8 tie-back points
  • 3/4 LED marker lights
  • Hydraulic stiff legs
  • Adjustable pylon
  • Shackles
  • Pads w/ fold-down spades
  • Manual controls
  • 2 winch tensioners
  • Winch cover plate
  • (2) 3/8" × 75' winch cables w/ self-locking hooks
  • Gloss black paint

Options

  • Custom colors
  • Strobe package
  • Snatch block

Warranty

  • 2-year manufacturer's warranty*
Quote a DSP Sidepuller →▶ Watch It Work
Dual-Tech welder building a deck in Bean StationBuilt to Order
Custom Sizes & Special Jobs

Don't See Your Size?

Every Dual-Tech is built to order in Bean Station, so the sizes on this page are a starting point, not a limit. Odd bed lengths, custom decks, municipal and heavy-recovery setups, or a chassis nobody else wants to touch. Tell us the job and we'll build it.

CustomBed lengths
Any colorDeck and chassis
Your chassisOr we supply it

What We Build

  • Custom bed lengths and widths
  • Custom deck and toolbox layouts
  • Municipal and fleet builds
  • Heavy-recovery setups
  • Color matching and custom paint
  • Sidepuller and wrecker combinations
  • Customer-supplied chassis

How It Works

  • Call the factory or send the quote form
  • Tell us the job, the chassis and your timeline
  • We price it and confirm what's possible
  • Your truck is built and assembled in East Tennessee
  • Backed by the same 2-year warranty
Get a Custom Quote →Call 800.852.0345
Side by Side

Compare Gen II Models

Spec10 Series12 Series16 Series
Deck rating10,000 lb12,000 lb16,000 lb
Lengths19'6", 20', 21'21', 22', 23'22', 23', 24'
Bed width96" (100" or 102" opt.)102"102"
Side railsSolid removableFormedFormed
Crossmember10" spacing (8" opt.)8" (6" opt.)8" (6" opt.)
Wheel lift3,500 lb4,000 lb4,000 lb
Load angleAs low as 9°As low as 9°As low as 9°
Winch9K planetary12K planetary12K planetary
Sub-frameQuad railQuad railQuad rail
I-beams4"4"6"
Warranty2 years*2 years*2 years*

*Warranty covers Dual-Tech manufactured items only. Other components are warranted by their respective manufacturers.

Your Chassis, Our Deck

Built on the Truck You Run.

We supply the chassis, or bring your own. We build Dual-Tech decks on qualified OEM chassis from every major make.

  • Ford
  • Ram / Dodge
  • Chevrolet
  • Freightliner
  • International
  • Hino
  • Kenworth
  • Peterbilt
  • Mack
Ram chassis waiting for Dual-Tech decks

Not Sure Which Deck?

Tell us what you haul and what you drive. We'll point you to the right build.

Talk to the Factory →See In-Stock Trucks